Skip to content

Body worn camera

IK-100 Body Worn Camera

1440P local recording with 1080P live streaming on the Ambarella H22 platform. Up to 12 hours of recording per charge, IR night vision to 10 metres, AES256 encryption on the card and on the stream, IP67 against dust and water — manufactured in-house, with optional 4G, GPS and PTT.

IK-100 body worn camera, front view with lens, IR illuminators and large record button
IK-100 — front view

Why the IK-100

Built for a full shift, not a demo

  • 1440P30 local recording with H.264/H.265, plus a 2.0" colour screen and 140° wide-angle F1.8 lens.
  • Up to 12 hours at 1080P on one charge — a full shift without swapping batteries; 4 hours to recharge.
  • Live streaming to 1080P30 over Wi-Fi or optional 4G LTE, with audio and text streaming alongside video.
  • Sees in the dark: dual IR illuminators reach 10 metres at 0 lux with clear human-shape imaging.
  • AES256 everywhere: files encrypted on the card, RTSP streams encrypted in transit, HTTPS and dynamic PIN Wi-Fi access.
  • Field-proof: IP67 sealed against dust and water, rated for 1.8 m drops onto hard surfaces.
  • Operator-first controls: large front record button, top record button, yellow PTT and SOS keys, programmable audio and vibration alerts.
  • Integration-ready: RTSP, ONVIF, RTMP, MQTT and FTP (optional), USB/JSON command control, and secondary development support.

Capabilities

What the IK-100 covers

Recording & evidence capture

1440P30 top resolution, 46 MP photos, snapshot during recording, selectable clip lengths from 1 to 30 minutes, pre- and post-recording buffers of 30–60 seconds, loop recording and motion detection.

Live operations

Streams video, audio and text at 1080P30 down to 320P30 over Wi-Fi or optional 4G. SOS raises an audible alarm across the camera group and alerts the command centre with the camera's location.

Positioning & stamping

Optional GPS with timezone sync. Overlays user ID, device ID, date, time, geo-tags and logo on the footage, so every clip carries its own chain of custody.

Group communication

Yellow PTT button with optional group talkback — camera to camera, camera to command centre and back. Text messaging between cameras and the command centre is supported.

Close-up

Every angle, in detail

IK-100 body worn camera, front view
Front — 140° lens, IR illuminators, record button
IK-100 body worn camera, side view with PTT button and controls
Side — PTT key, backlight, mic and power controls
IK-100 body worn camera, side view with SOS button and USB port
Side — SOS key and USB-C port behind the cover

Specifications

IK-100 technical specifications

Standard configuration unless marked optional. Options are configured at order time — tell us what your deployment needs.

Physical
Dimensions84.5 × 56.3 × 27.3 mm
Weight163 g (0.31 lb)
Display2.0" TFT colour screen
Standard mount360° rotatable crocodile clip
Optional mountsMOLLE-compatible mount; CLICKFAST stud
Camera
ChipsetAmbarella H22
Lens140° wide angle, F1.8 aperture (horizontal FOV 140°)
Minimum illumination0.1 lux
Night vision2 IR LEDs, up to 10 m illumination range; clear human-shape imaging at 0 lux
Fill light90° fill light for low-light conditions, enable/disable via button
Laser pointerOptional — for target positioning, enable/disable via button
Image stabilizationOptional — 6-axis electronic image stabilizer (EIS)
Video, photo & audio
Video codecH.264 / H.265, MP4 container
Local recording1440P30 · 1080P60 · 1080P30 · 1080P25 · 1080P15 · 720P30 · 720P60 · 480P30
Live streaming1080P30 · 720P30 · 480P30 · 320P30, with audio and text streaming
Streaming bitrate300 kbps – 4 Mbps
PhotoJPEG, up to 46 MP; snapshot during recording
AudioAAC
Clip length1 / 2 / 3 / 5 / 10 / 30 min, selectable
Video stampUser ID, device ID, date, time, geo-tags and logo overlay
Pre / post recording30–60 seconds each, varies by resolution setting
Loop recordingConfigurable via menu; motion detection supported
Connectivity
Wi-Fi2.4 GHz & 5 GHz, AP/STA/P2P modes, IEEE 802.11 b/g/n/ac, WPA-2
BluetoothBluetooth 5.0
CellularOptional 4G LTE — Cat-4 (150↓ / 50↑ Mbps) or Cat-1 (10↓ / 5↑ Mbps); FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B20/B28/B66, TDD B38/B40/B41
GPSOptional; timezone via menu or GPS sync
Network protocolsRTSP / ONVIF / RTMP / TCP / UDP / MQTT / FTP (optional)
USBUSB Type-C, supports external camera connection; USB & JSON command control
DockingPogo pin connector, dock-and-go operation
Battery
1080P local recordingUp to 12 hours
480P local recordingUp to 14 hours
4G streaming + recordingApprox. 7.5 hours
Charging time4 hours
Durability
Ingress protectionIP67
Drop resistance1.8 m (5.9 ft)
Security
File encryptionAES256 during writing to memory card
Stream encryptionAES256 for RTSP video / audio / text streaming
Network securityHTTPS & HTTP server supported
Wi-Fi securityDynamic PIN code authentication
Driver compatibilityAmbarella driver-free connection, even with USB encryption enabled
Storage & accessories
StorageOptional — 32 GB / 64 GB / 128 GB / 256 GB / 512 GB
External cameraOptional — supported via USB
Earphone jackOptional
Special functions
SOS alarmSOS button activates an audio alarm on all group cameras and sends alarm + location to the command centre
PTT group talkbackOptional — camera-to-camera, camera-to-command-centre, command-centre-to-camera; groups configured via camera or platform
Text messagingBetween cameras and the command centre
Holster sensorOptional — automatic recording via holster hall sensor
Remote controllerOptional
Re-developmentSecondary development supported — SDK and API documentation available
Packaging
Carton size47 × 32 × 24.6 cm
Quantity / weight20 pcs per carton, 13.5 kg gross

Working together

The camera is half the system

Evidence management

Paired with DEMS or DEMS PRO, the IK-100 offloads its recordings automatically on docking — encrypted in transit and on the card, filed under case numbers, with a full audit trail.

Live command

With the optional 4G module, the IK-100 streams live video and position into CMSV9 — multi-window live view, map positioning, intercom and alarm linkage from the command centre.

Docking & data transfer

On end of shift, the IK-100 docks into the DS-UES-22 station — six bays charge at 2A each and upload recordings over the network automatically.

Your platform

ONVIF, RTSP, RTMP, MQTT and USB/JSON command control let the IK-100 feed third-party software. See integration and SDK for what we document and support.

FAQ

IK-100 — common questions

How long does the IK-100 record on one charge?

Up to 12 hours of continuous local recording at 1080P, up to 14 hours at 480P, and approximately 7.5 hours when streaming over 4G while recording at the same time. A full charge takes about 4 hours.

Does the IK-100 support 4G live streaming?

Yes, as an option. The camera accepts an optional 4G LTE module — Cat-4 with 150 Mbps downlink or Cat-1 with 10 Mbps downlink — with wide FDD and TDD band coverage. Live video streams at 1080P30, 720P30, 480P30 or 320P30 and can be viewed in our CMSV9 command platform. Without the cellular module, the camera streams over built-in dual-band Wi-Fi.

Can the IK-100 integrate with our own software?

Yes. The camera speaks RTSP, ONVIF, RTMP, MQTT and FTP (optional) over TCP/UDP, supports USB and JSON command control, and secondary development is supported. We provide SDK, API and streaming protocol documentation so your team can evaluate the integration before committing.

How is the recorded footage protected?

Files are AES256-encrypted as they are written to the memory card, and RTSP video, audio and text streams are AES256-encrypted in transit. The camera serves HTTPS, and Wi-Fi access uses dynamic PIN code authentication.

Is the IK-100 available as OEM or white label?

Yes. We manufacture the camera ourselves — hardware design, firmware and assembly are in-house — so we offer white-label housing and branding, firmware adaptation to your workflow, and custom packaging under our OEM and ODM programmes.

Request a quote

Get IK-100 pricing and lead time

Send us the model, your expected quantity and your destination country — we will come back with pricing, configuration options and shipping terms.

Sales

For pricing, samples and deployment planning:

sales@iotkam.com

OEM & ODM

For white-label programmes and custom firmware:

oem@iotkam.com